Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tutti Bambini ISOFix
Summary of Contents for Tutti Bambini ISOFix
- Page 1 ISOFix Child Restraint System Assembly Instructions...
- Page 2 ISOFIX anchorages systems. It will fit vehicles with positions approved as ISOFIX positions(as detailed in the vehicle handbook),depending on the category of the child seat and of the fixture. The mass group and the ISOFIX size class for which this device is Congratulations on your new arrival! intended is :CLASS D, This seat can be used for children of 0-13kg in weight.
-
Page 3: Table Of Contents
Contents Vehicle usage Vehicle usage Parts and fittings Fitting the ISOFix base ISOFix child restraint system Installation Loosening the shoulder straps The harness Correct shoulder height Removing the ISOFix base WARNING Care and maintenance In an accident, enormous forces occur. Never try to secure a... -
Page 4: Parts And Fittings
Fitting the ISOFix base Parts and fittings 1. Fitting the base into a car which has ISOFix System Installed on seats fitted with ISOFix anchor points (located between seat and seat back) & with leg room. ISOFix installation markings should be green... -
Page 5: Fitting The Isofix Base
Press the seat down into the ISOFix base. WARNING To install the ISOFix Child Restraint System, read the instruction manual carefully, the safety of your child is only guaranteed if the seat is used correctly. It is therefore important that you take the time to read these instructions through carefully. -
Page 6: Isofix Child Restraint System
ISOFix child restraint system WARNING Put the red plastic protectors into the correct position on the car which is suitable for the ISOFix so that the To install the ISOFix Child Restraint System, read the instruction connectors can fit into these protectors. -
Page 7: Installation
Installation Loosening the shoulder straps 1. Opening the harness Press the red button on the support leg to extend it. Make sure the support leg Press the red release button is touching the floor. Check that the red button is now green in the support leg that is touching the floor. -
Page 8: The Harness
The Harness The Harness 1. Fastening the harness The harness should be adjusted as tightly as possi- ble without causing discomfort to the child. A loose Slot the two plastic sections of the buckle harness is dangerous and should be checked each connectors together. -
Page 9: Correct Shoulder Height
Pull the black plastic coat of the ISOFix connectors to make the isofix connectors in the window red. Now a) The straps of the child safety seat are close to the release the car seat from the ISOFix base and the body without constricting the child. -
Page 10: Care And Maintenance
Care and Maintenance Removing the cover Put the support leg into the isofix base slot. The fabric cover can be easily removed for washing. Remove the harness by gently feeding the straps through from the front to the back of the seat, the crotch strap including the buckle should be removed;... -
Page 11: Www.tuttibambini.com
Join Us Follow us on Facebook TuttiBambiniUK Follow us on Twitter TuttiBambiniUK Follow us on Instagram TuttiBambiniUK www.tuttibambini.com...
Need help?
Do you have a question about the ISOFix and is the answer not in the manual?
Questions and answers