System; Initial Installation - ABOX42 M30 User Manual

5. System

Receptor IR
Power LED
3. AV 9. LAN
4. S/PDIF 10. DC IN***
5. HDMI*
6. MICRO SD
7. USB**
8. USB**
*The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
**USB load with 5V / 500mA
***Power supply by: Chou Sen Electronics (Shen Zhen) Co., Ltd.
5150 - 5350MHz restricted to indoor use
8
1
2
3 4 5 6 7 8 9 10

6. Initial Installation

The initial installation of your M30 device is directed by a user friendly installation assistant. The initial
installation begins automatically, as soon as the device is supplied with electrical power for the first time
and after a reset. You are guided through the menu by a simple dialogue. Just follow the instructions on
the television screen and select your language, your internet connection and your current software versi-
on.
Note
Follow the further installation instructions on your television screen. Should your M30 device not be able to
establish an internet connection, you will receive an appropriate cue. Check your router settings and make
another attempt.
Select language
Select the desired language and confirm with OK.
Select network connection
Select the desired network connection and con-
firm with OK.Note: We recommend performing
the initial installation with the aid of a network
cable (LAN).
Configuration of the network connection
Confirm the selection with OK. The network con-
nection will now be established. You will receive the
cue: Connection established successfully.
9