Advertisement
Quick Links
Specifications:
1. Power: 220-240V~ 50Hz.
2. Rated load: 32W
3. Lamp type: CREE COB LED 13W x 2 pcs, 2000 lm / 5000K
Lamp head:
The lamp head can turn 90° horizontally and 50° vertically allowing for optimum illumination.
Installation:
Warning: This product must be installed only by a qualified electrician. Installation must follow
local building codes as well as the instruction contained in this manual. Turn off power at circuit
breaker or fuse box, to make sure power is off before installation. If you have any doubts about
the installation procedure, please consult a professional mechanician.
The product is to be mounted on wall (Figure 1). Ensure the product is screwed securely to the
wall.
SLRF26SW/SLRF26SB
LED LIGHT
50°
90°
Figure 1
1
Advertisement
Related Manuals for Challenger SLRF26SW
Summary of Contents for Challenger SLRF26SW
-
Page 1: Specifications
SLRF26SW/SLRF26SB LED LIGHT Specifications: 1. Power: 220-240V~ 50Hz. 2. Rated load: 32W 3. Lamp type: CREE COB LED 13W x 2 pcs, 2000 lm / 5000K Lamp head: The lamp head can turn 90° horizontally and 50° vertically allowing for optimum illumination. - Page 2 Connection to the power supply: 1. Note: This product must be installed according to local Wiring Regulations and Code of Practice. 2. Ensure the supply is disconnected at the distribution board before starting the electrical wiring. 3. Study the wiring diagram below before making any electrical connections. Incorrect wiring of the unit could destroy the product and will not be covered by the warranty.
- Page 3 Due to our policy of continuous improvement we reserve the right to change specification without prior notice. Errors and omissions excepted. These instructions have been carefully checked prior to publication. However, no responsibility can be accepted by Challenger for any misinterpretation of these instructions.