Batteries; Caution; Installation - Teknik GC1035 Manual

2．2

BATTERIES

Caution：
· This metal detector is powered by two 9-Volt alkaline batteries (not supplied).
· Only fresh and proper type of alkaline batteries is recommended
· Do not mix the old and new batteries or different types of batteries.

Installation

1. Be sure the power switch is at off-position.
2. Slide the battery cover off in the direction of the arrow.
3. Take out two battery connectors from the compartment。
4. Join the battery polarities with the connectors.
5. Re-install the battery cover.
Warning：
Dispose of old batteries promptly and properly, do not bury or burn the batteries.
Note：
· If you don't plan to use the unit for a week or more time, remove the batteries. Batteries
can leak chemicals that can destroy electronic parts.
·To extend the battery lift, exchange the left and right battery after 3-4hours of operation.
· "LOW BATT" icon will display on bottom right corner of the LCD when the batteries are
needed to be changed.
5