Assembly - Teknik GC1035 Manual

2．1 ASSSEMBLY
1． Open the packing, and take out all parts.
2． Join the search coil and the lower
stem (fiberglass-made,
color)，then tighten the bolt.
3． Press the silver button on the upper
end of the lower stem, and slide the
lower stem into the upper stem.
Adjust the stem to a length that you
feel comfortable when you stand upright with the detector in your hand, and the
search coil is level with the ground with your arm relaxed at your side. Then
counter-clockwise rotate to tighten the
lock cam.
4． Wind the search coil cable around the
stem. Insert the search coil's plug into
the search coil jack on the detector's control housing.
Caution:
Do not over-tighten the search coil or use tools such as pliers to tighten it.

The search coil's plug fits into the connector only in one way. Do not force the plug

and also do not pull on the cable or you could damage it.
5． Assembly of the arm support: Insert the aluminum stem on the arm support into the
stem at the end of the main box and tighten the fixing screw properly.
2．ASSEMBLY
Assembly is easy and requires no tools：
in black
4