Related Manuals for NookBox P119002
Summary of Contents for NookBox P119002
- Page 1 NookBox Installation Guide Siren Outdoor Installation Guide Siren Outdoor P119002 / E6309662...
- Page 2 Siren Outdoor Siren Outdoor P119002 / E6309662 The outdoor siren is used to attract attention when alarm signal is received from Control Panel, by activating its siren and strobe light. The siren can also alert you to tamper violation, and low...
-
Page 3: Identifying The Parts
NookBox Installation Guide Siren Outdoor Identifying the Parts 1. Tamper Switch The Tamper switch will be activated when the siren is removed from mounted surface, or when its cover is opened. 2. Battery Compartment The Bellbox is powered by two 1.5V D-Cell alkaline batteries. -
Page 4: Accessories Included
NookBox Installation Guide Siren Outdoor Accessories included In addition to the Bell Box itself, the following accessories are also included in the package: a. 3 x large wall plugs. b. 3 x fixing screws for wall mounting c. 2 x 1.5V D alkaline batteries (pre-inserted) Battery and Low Battery Detection The siren is powered by 2 1.5V Alkaline D batteries, it features low battery detection and will transmit low battery signal when low battery... -
Page 5: Function Overview
NookBox Installation Guide Siren Outdoor Function Overview Alarm Memory If an alarm was triggered in your absence and the system was not disarmed before alarm length expiry, the siren will sound a short alarm when the system is disarmed to warn the user that an alarm has been triggered when he is away. This suggests that the intruder could still be within the premises. -
Page 6: Getting Started
NookBox Installation Guide Siren Outdoor Getting Started Learning Step 1: Release the bottom screw of the Bellbox using a Philips screwdriver and remove the top cover. Step 2: Put the Control Panel into learning mode (refer to Control Panel’s user manual for details). -
Page 7: Installation
NookBox Installation Guide Siren Outdoor Installation Proceed to installation after complete learning. Step 1: Disable the Siren Tamper function on the Control Panel (please refer to the Control Panel instruction manual). The siren will sound a beep to indicate the tamper switch is now disabled. -
Page 8: Changing The Battery
NookBox Installation Guide Siren Outdoor Changing the Battery Step 1: Disable the Siren Tamper function on the Control Panel (please refer to the Control Panel instruction manual). The siren will sound a beep to indicate the tamper switch is now disabled. - Page 9 NookBox Installation Guide Siren Outdoor For more information visit: www.getnookbox.com...