• 7 selectable display modes available on the market today. The Raden- • Displays radar frequency during visual so Pro M is the evolution of the Radenso alert. equipped with an additional circuit designed • Voice Alerts with frequency announce- to detect the newest MultaRadar and Gatso ment during alert.
Intuitive OLED display compact travel B. Power Cable E. USB Cord • Provides power to the Pro M with its own on/ • Mini USB cord connects your Pro M and com- off switch puter to allows firmware updates C. Windshield Mount •...
Direct Wire Kit (optional) Visor Mount (optional) • The visor mount allows you to clamp your Pro M • Allows you to hardwire your unit directly to to your visor rather than your windshield your vehicle • Compatible with the Radenso Pro / Pro SE / •...
Plug the small end of the power cable into detector as high as you can. the power jack on the Radenso Pro M left Place the small side of the suction cups side and connect the large plug with the into the large hole of the bracket.
Pro M user interface C. Driving Mode Button The Radenso Pro M has an easy to use interface. The unit has four buttons on Short Press: Changes current driving mode top and two on the side to make changing (Highway, City, or AutoCity) settings simple and quick.
menu settings and features Setting Mode Minimum Speed Sensing Radar Description: selects the driving mode Description: Select the minimum speed to Options: Highway, City, AutoCity sense radar Options: off, 10-130 mph Display Mode X Band Description: Select what the display should Description: Activate or deactivate X band show Options: Speed/Time, Speed/Voltage,...
Page 9
menu settings and features MRCT Band GPS detection by database type Description: Activate / deactivate MRCT Description: via middle button, you can band select different types of GPS alert areas. For Options: off, narrow, wide editing, use +/- buttons on the side. You can toggle each type of alert on and off.
Setting the City and AutoCity sensitivity To manually unlock the detector press the (this feature is only selectable if the Pro M is middle button for 2 seconds in a locked out in City or AutoCity mode): by means of the area.
• Check if the display is set to “dark” mode. Radenso Pro M never alerts to radar The detector alerts visually but there or alarm turns on after passing the are no voice or audio alerts.
Contact Information Thank you for purchasing the most advanced radar and laser defense in the world. Here at Radenso, we take your support very seriously; if you need support in any capacity, please contact us. Address noLimits Enterprises...
Need help?
Do you have a question about the Pro M and is the answer not in the manual?
Questions and answers