Table of Contents
Advertisement
LinkNet™ LNKA800 RF MODULES ! USER MANUAL
Operation
Software Set-up
The LNKA800 module is shipped with the following factory set options:
Default values may be changed when an order is placed. Check your order
confirmation (shipped with modules) for customized values.
In line with the versatility of the LinkNet
LNKA800 module in the field. For further information on the modification software
and the PC adapter, contact KAVAL WIRELESS TECHNOLOGIES by E-mail:
info@kaval.com
Configuration
In line with the versatility of the LinkNet
LNKA800 module in the field, either with a Personal Computer (PC) or via the
optional Control Module. To use a PC it is necessary to have a Kaval
CAB000000057 Control Cable to connect between the appropriate Module's DB15
connector on the back of the Card-Cage and the standard DB9 RS232 Connector on
the PC. On the PC a terminal emulation program such as HyperTerminal is used to
communicate to the LinkNet Module. The settings are 9600 baud, 8 bits, no parity,
and 1 stop bit. Commands are one or two words followed by pressing Return.
Commands may be given in upper or lower-case. Available commands are...
ACCESS USER:
HELP or ?:
LIST:
VER:
ENABLE 1 or 0:
GAIN ###:
AGCTHRESH ###:
AGCEN 1 or 0:
Please consult Kaval Wireless Technologies for further support.
Printed: 01.05.08,16:18
OPTION
RANGE OF VALUES
Frequency
Gain
AGC
+15 to +30 dBm or Disabled
Module Enabled
Required as a simple password to gain access to customer
settable parameters and diagnostics; This will time-out after 10
minutes, and may have to be re-typed.
Displays a list of Available Commands.
Displays Current Settings and Status Faults, Etc.
Display the current Version of Software.
Enables or Disables the Module.
Displays or Sets the Module Gain (in tenths of a dB).
Displays or Sets the AGC Level (in tenths of a dBm).
Enables or Disables AGC.
Revision Date:5/8/01
See Model Chart
+34 to +84 dB
On / Off
TM
Platform, it is possible to re-configure the
TM
Platform, it is possible to re-configure the
DCM000000054
DEFAULT VALUE
Order Specific
+34 dB
+30 dBm
On
7
Advertisement
Table of Contents
