Table of Contents
Advertisement
LinkNet™ LNKA800 RF MODULES ! USER MANUAL
Module Specifications
Printed: 01.05.08,16:18
Frequency Bands
Modulation & Channel Spacing
RF Output Power Capability
AGC Control Adjustment Range
Gain Adjustment Range
Noise Figure
Maximum RF Input
Transmit Duty Cycle
Transmit Spurious
Receive Conducted Spurious
Group Delay
RF Connectors
Module Power Supply Requirements
Connections
Front Panel Indicators
Configuration Options
Operating Temperature Range
Operating Humidity Range
Size & Weight
Revision Date:5/8/01
See Model Chart
Broadband Amplifiers
1dB Compression Point = +37 dBm Typical
IP3 Intermodulation = +47 dBm Typical
+15 to +30 dBm or Disabled
+34 to +84 dB
<8 dB, 5 dB Typical
< +10 dBm without Damage
Continuous
-13 dBm max
-57 dBm Max
<5 uS
SMA (50Ω) Connectors on back of Card-Cage
40 Watts Maximum
Edge Connector & 2 Blind-Mate RF Connectors to
Card-Cage, DB-15 Connector on back of Card-
Cage provides per-Module Fault Relay,
Interconnect to other Modules, & RS-232
Connection
Operating, Stand by, Fault, Program Mode
RF Modules may be configured either via the
optional Controller Module, or via a PC and an
RS-232 Connection via the Card-Cage.
o
-10 to +50
C; Consult Kaval for installation specific
forced-air cooling requirements
10 to 90% RH, Non-Condensing
9.11" High, 2.00" Wide, 14.00" Deep,
10 lbs, 4.5 kg Max
DCM000000054
6
Advertisement
Table of Contents
