Advertisement
Quick Links
Fig A
WIRING INSTRUCTIONS
1. Ensure that the mains electrical supply is switched off during the installation of the fixed wiring spur.
2. Read carefully "Important-Electrical Information" above.
3. Connect as shown in the Wiring Diagrams below.
RMF 100
RMF 100 LV
CLEANING & MAINTENANCE
1. Disconnect mains electrical supply by means of double pole switch.
2. Remove front grille as described above.
3. Remove the plastic impeller (by loosening the nut) and wash it with mild detergent.
4. To clean the inner part of the fan, use a soft brush taking care not to cause any damage or disturb the
electrical wiring.
Vectaire Ltd
Lincoln Road,
Cressex Business Park,
High Wycombe, Bucks, HP12 3RH, UK
Tel: +44 (0) 1494 522333 Fax: +44 (0) 1494 522337
Fig B
RMF 100T, RMF100 2R, RMF100 H2R
Lamp
RMF 100TLV
"RMF" - RECESSED HIGH
PRESSURE DUCT FANS
Installation Instructions
•
for toilets, bathrooms and utility rooms
•
suitable for installation in:
-
ceiling
-
wall
•
4 models:
-
standard
-
timer
-
two speed
-
humidity control with two speed
•
2 Low Voltage (SELV) models
-
standard
-
timer
Advertisement
Related Manuals for Vectaire RMF 100
Summary of Contents for Vectaire RMF 100
-
Page 1: Installation Instructions
3. Connect as shown in the Wiring Diagrams below. RMF 100 RMF 100T, RMF100 2R, RMF100 H2R Lamp • for toilets, bathrooms and utility rooms • suitable for installation in: RMF 100 LV RMF 100TLV ceiling wall • 4 models: standard timer... - Page 2 “RMF” - RECESSED HIGH PRESSURE DUCT FANS The fan is a fixed appliance, and the electrical supply must therefore be by a fixed wired and fused (3 amp) spur incorporating a double pole switch with contact openings of at least 3 mm. Use twin conductor cable Installation Instructions of at least 1 mm in section.