Back to Basics Solution 5000 User Manual page 8

Back to basics user's guide blender solution 5000

Hide thumbs Also See for Solution 5000:

Table of Contents

Available languages

To use your Blender Solution

Lid

Clear Lid Cover

Glass Mixing Jar

Rubber Gasket

Blender Blade Base

1. Position the rubber gasket down onto the circular ﬂ at surface in the

plastic blender or smoothie blade base.

2. Place the bottom threaded section of the glass mixing jar down into the plastic

blade base. Engage threads by twisting the blade base clockwise until tight-

ened onto the jar. Make sure that the blade base is tightly fastened to the jar

and that the rubber gasket is properly compressed between the jar and the

plastic blade base.

3. Push the lid onto the top of the mixing jar. Place the clear lid cap in the center

of the lid or place the stir stick through the center of the lid.

4. Place the mixing jar onto the motor base so that the bottom of the blade base

is sitting ﬂ at on the motor base.

5. Plug in the cord. Your Blender Solution

ASSEMBLY

Use and Care (Assembly)

5000, begin by assembling the glass mixing jar.

™

5000 is now ready to use!

™

Table of Contents