Select Multiple - TypeS Plug & Glow Instruction Manual

A Master On/Off Switch
B LED Zone Functions:
Connect and control up to four
separate zones.
On/Off: Press each zone icon to turn
LED On or Off.
Move Zone Icon:
Press and hold zone icon, select
"Move" to position each zone icon at
your desired location.
Rename Zone Icon:
Press and hold zone icon, select
"Rename" to rename each icon.
(Note: Maximum 4 characters).

Select Multiple:

You can select multiple zones and
control the same setting at once.
Press and hold zone icon, select
"Select Multiple"
desired zone by pressing
To ungroup your selection, press and
hold zone icon and select "Ungroup".
Select Vehicle Schematic:
Press>, select your desired vehicle
schematic.
then select your
"Confirm".
Save Preset:
C
You can save your favorite settings.
After creating your setting, press
"Save Preset"
name. You can save up to 10 preset
settings.
Select Preset:
You can select your previously saved
preset setting, press
and choose your saved setting.
Delete Saved Preset Setting:
To delete a saved preset setting,
press "Select Preset"
hold the preset setting that you wish
to delete. Press
Select Color:
Choose from up to 49 different
colors. Press
your desired color and press
"Confirm".
D
Brightness:
Slide bar to adjust brightness setting
LED Mode:
E
Choose from 8 different modes
Note: Music Mode is sound activated.
Speed:
F
Slide bar to adjust the speed of the
movement from each LED Mode.
and enter your preset
"Select Preset"
and press and
"Yes" to delete.
"Select Color", select