Technical Specifications; Installation - TypeS Plug & Glow Instruction Manual

TECHNICAL SPECIFICATIONS

Working voltage: DC 12V Only
Bluetooth distance: No obstacle 30ft
Frequency band: 2.4GHZ
Types of LED: 5050 SMD RGB
Maximum LED: 20ft
Maximum amperage draw: 3A
12V DC
(total combined)

INSTALLATION

• Choose your desired location.
( – see suggestions above)
• Clean surface thoroughly with
isopropyl alcohol. Dry completely.
• Peel off the 3M™ tape backer and
carefully apply to the desired area.
Note:
• For use with 12V power only
• Suitable temperature for
installation is 70°F (21°C) or above.
• If needed LED strips can be cut – ONLY
cut where scissors mark is shown.
Note the
portion of
12V DC
strip that is
cut-off is
12V DC
no longer
usable.
3M
3M
3M
3M
3M
3M