Brew Group Washing - Saeco SUP032BR Operation And Maintenance Manual

30

Brew Group Washing

> maintenance > group wash
To clean the machine's internal circuits used for brewing coffee.
To wash the Brew Group, simply clean with water as shown on page 35. This wash completes
maintenance of the Brew Group. We recommend using Saeco tablets, which can be purchased
separately.
Note: before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the appropriate tablet for cleaning the Brew Group has been inserted into the
compartment for pre-ground coffee;
THE WASH CYCLE CANNOT BE INTERRUPTED.
A PERSON MUST BE PRESENT DURING THE OPERATION.
1
3 maintenance
1.
2.
4
3.3.1 group wash
execute now
Press
7
passage
[2/3]
You can check the status of
washing.
2
3.3 group wash
5
insert tablet
and press start
Insert the tablet as shown above.
Press to start.
8
wash cycle completed
please wait
3
3.3 group wash
6
group wash
please wait
Wait for the cycle to end.
9
3 maintenance
The Brew Group has been washed.
Exiting programming mode.
(see page 18)