Advertisement
currents to digital outputs. Channel 1 digital output is used to compensate for the effect of the
infrared component of light on the channel 0 digital output. The ADC digital outputs from the two
channels are used in the formula below to obtain a value that approximates the human eye response
in the commonly used illuminance unit of Lux:
Chipscale Package
For 0 < CH1/CH0 <= 0.52
For 0.52 < CH1/CH0 <= 0.65
For 0.65 < CH1/CH0 <= 0.80
For 0.80 < CH1/CH0 <= 1.30
For CH1/CH0 > 1.30
TMB Package
For 0 < CH1/CH0 <= 0.50
For 0.50 < CH1/CH0 <= 0.61
For 0.61 < CH1/CH0 <= 0.80
For 0.80 < CH1/CH0 <= 1.30
For CH1/CH0 > 1.30
An Evaluation System for the TSL2560/61 Ambient Light Sensor
Lux = 0.0315 X CH0 − 0.0593 X CH0 X ((CH1/CH0)
Lux = 0.0229 X CH0 − 0.0291 X CH1
Lux = 0.0157 X CH0 − 0.0180 X CH1
Lux = 0.00338 X CH0 − 0.00260 X CH1
Lux = 0
Lux = 0.0304 X CH0 − 0.062 X CH0 X ((CH1/CH0)
Lux = 0.0224 X CH0 − 0.031 X CH1
Lux = 0.0128 X CH0 − 0.0153 X CH1
Lux = 0.00146 X CH0 − 0.00112 X CH1
Lux = 0
8 of 11
1.4
)
1.4
)
www.taosinc.com
Advertisement
