Advertisement
Getting Started Guide
SIRIUS GOLD
Power Supply Information
The power supplies are auto sensing between 90V and 264V. Connect the cable to the IEC connector(s) at the rear of
the frame. The green power OK LED on the front of the power supplies should turn on. A minimum of two power
supplies are required at all times.
The fuse used in the IEC connector is rated at 10A, 250V. If this fails, ensure it is replaced with the same
specification.
Your frame may have been supplied with lifting handles. If so refer to the information supplied with the handles.
!
THIS UNIT IS HEAVY. TAKE CARE WHEN MOVING IT.
Caution
WWW.PRO-BEL.COM
UK
USA
France
+44 (0) 1189 866 123
+1 631 549 5159
+33 (0) 1 45 18 39 80
653928-02
Advertisement
