Dukane 8133WSS User Manual – Operating Manual page 113

Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
USB TYPE B
Cases not involving a machine defect
When the projector is operating in LONG LIFE mode or
The OVER SCAN ratio is too big.
The FRAME LOCK function cannot work on the current
input signal.
When LAN or USB TYPE B port is selected, some
ports of the output may be missing due to signal
processing delay.
The computer cannot start up in the current hardware
The SAVING/NETWORK(WOL) function is working.
The COMMUNICATION TYPE for the CONTROL port is
set to NETWORK BRIDGE.
The SAVING/NETWORK(WOL) function is working.
The same network address is set for both wireless and
wired LAN.
The NETWORK BRIDGE function is turned off.
Troubleshooting
Reference
page
53
43
46
48
11
55
74
55
74
113