Placing A Call On Hold - Motorola 9505 Series Instruction Manual

Placing a Call on Hold

Satellite
Mode
66 Using In-Call Features
You must subscribe to this network feature through
your service provider(s).
Note: This feature behaves differently based on the
mode you are in. Check your mode settings before
using this feature. See "Selecting a Mode" on
page 173.
You can place a call on hold to receive a new call or
while making a new call. You can only place one
call on hold at a time, so some options may not be
accessible if you have already placed a call on
hold.
To place a call on hold:
M
1. Press
O
2. Press
and you will see
Reconnect?
Once your call is on hold, you have these options:
If you want to...
make a new call
switch between
calls
end both calls
end current call
Hold Call
until you see
. Your current call is put on hold
Call Holding
.
Then...
M
1. Press
New Call
, and then press
select.
2. Dial the number as usual, and
then press
When you are connected to either
number, you will see
Switch?
followed by
O
Press to switch to the other
call and automatically place the
current call on hold.
M
Press until you see
& Held Call
, and then press
to select.
Both calls are disconnected, and
the display returns to standby.
C
Press at any time.
.
followed by
Make
until you see
O
O
to place the call.
2 Calls
.
End Active
O
to