Servicing method
4.3. Removing the switch unit
1. Remove the rear cover. (See 4.2.)
2. Disconnect the coupler. (E1)
3. Remove the fixing screw. (1pcs)
4. Remove the switch unit.
4.4. Removing the E-Board
1. Remove the switch unit. (See 4.3.)
2. Remove the fixing screws. (2pcs)
3. Remove the E-Board.
4.5. Removing the C-Board
1. Remove the rear cover. (See 4.2.)
2. Disconnect the coupler. (C1)
3. Remove the fixing screws. (2pcs)
4. Remove the C-Board.
4.6. Removing the IR/LED unit
1. Remove the rear cover. (See 4.2.)
2. Disconnect the coupler. (D1)
3. Remove the fixing screws. (2pcs)
4. Remove the D-Board.
6