Chlorinator Installation - Calimar CMARSSG20-5 Owner's Manual

Chlorinator Installation

The Platinum Chlorinator must be installed by a quali ed pool professional or
certi ed electrician. If you have any questions or need assistance in nding a
quali ed installer, please contact our tech support hotline at (888) 635-0330 or
e-mail at: sales@calimarpool.com.
Your Platinum Chlorinator includes the following:
• 1 Control Center
• 1 Cell Housing
• 1 O-Ring
• 1 Jumper Wire
• 1 Electrolytic Cell with Cord and Cap
• 1 Mounting Bracket
• 1 Cleaning Stick –Acid Replacement Device
• 1 Owner's Manual
• 1 Wiring Conversion Literature (LOCATED ON BOX)
The following tools will be required to install the Platinum system:
- Screwdriver
- Level
- Hacksaw / or PVC cutter
- Wire Stripping Tool
- Electric Drill
- 8AWG Copper Bonding Wire
INSTALLING THE CONTROL CENTER WARNING! When using electrical products,
basic precautions should always be followed: be sure to read and follow safety
instructions on pages 4 though 6.
DANGER: Risk of electric shock, which can result in serious injury or death. Before
attempting installation or service, make sure that all power to the circuit supplying
power to the system is disconnected / turned o at the circuit breaker. Connect
only to a circuit protected by a ground fault circuit-interrupter (GFCI).
11