Bar And Chain Combinations; Troubleshooting - Ryobi CS1800 Operator's Manual

RECOMMENDED BAR AND CHAIN COMBINATIONS
Bar Part Number - 10 in. (254 mm)
Chain Part Number
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM
Bar and chain running
hot and smoking.
Motor runs, but chain is
not rotating.

BAR AND CHAIN COMBINATIONS

671256002 or 671667002
6958301 or 690583002

TROUBLESHOOTING

POSSIBLE CAUSE
1. Check chain tension for
over tight condition
2. Chain oil tank empty.
1. Chain tension too tight.
2. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
SOLUTION
1. Tension chain. Refer to "Chain Tension"
earlier in this manual.
2. Check oil tank.
1. Retension chain, Refer to "Chain Tension"
earlier in this manual.
2. Refer to "Assembling the Bar and Chain"
earlier in this manual.
3. Inspect guide bar and chain for damage.
31