Leica M 10-P Instruction Manual page 114

Hide thumbs Also See for M 10-P:
Table of Contents

Advertisement

EN
Taking the picture
Shutter button
Two-stage (1. step: Activation of the camera electronics including
exposure metering and exposure lock (in aperture priority mode); 2.
step: Press shutter button)
Self-timer
Delay time: 2 s or 12 s
Exposure
ISO sensitivity range
Automatic (
): ISO 200 to ISO 50000
A
Manual: ISO 100 to ISO 50000 (ISO 200 adjustable in 1/3 ISO
increments)
White balance
Automatic (
), presets (
Auto
,
cent Warm
Fluorescent Cool
ments (
), manual color temperature setting
Greycard
Exposure metering
TTL (exposure metering through the lens), with working aperture
Metering principle/method
When measuring the light reflected by the light blades of the 1. shutter
curtain onto a measuring cell: strongly center-weighted; when
measuring on the sensor: Spot-weighted, center-weighted, multi-field
metering
Metering range
At room temperature and normal humidity for ISO 100 at aperture 1.0
EV -1 to EV 20 at aperture 32. The LEDs in the viewfinder will flash if
the metering range is undercut/overshot
Exposure modes
Aperture priority mode (
manual aperture preselection
Manual: Manual settings for shutter speed and aperture
114
,
,
,
Daylight
Cloudy
Shadow
Tungsten
)
, one memory slot for manual measure-
): Automatic shutter speed control with
A
Flash exposure control
Flash unit connector
Via accessory shoe with central and control contacts
Synchronization
Optionally at the 1. or 2. shutter curtain
Flash sync time
: 1⁄180 s, slower shutter speeds available, automatic changeover to
TTL linear flash mode with HSS-compatible Leica system flash units if
sync time is undercut
Flash exposure metering
Using center-weighted TTL pre-flash metering with Leica flash units (SF
60, SF 40, SF 64, SF 26) or with system-compatible flash units via a
SCA 3502 M5 adapter
Flash measuring cell
2 silicon photodiodes with converging lens in the base of the camera
,
Fluores-
Flash exposure compensation
± 3 EV in 1⁄3 EV increments
Displays in flash mode (in the viewfinder only)
Using flash symbol LED
Power supply
Rechargeable battery (lithium-ion battery Leica BP-SCL 5)
1 lithium-ion rechargeable battery, rated voltage 7.4 V; capacity
1100 mAh, max. charging voltage/current: 1000 mA DC, 7.4 V;
operating conditions (in the camera): +0 to +40°C; manufacturer:
PT. VARTA Microbattery, Made in Indonesia
Charger (Leica BC-SCL 5)
Inputs: 100-240 VAC, 50/60 Hz, 300 mA with automatic
switch-over or 12 VDC, 1.3 A, output: DC, rated voltage 7.4 V,
1000 mA / max. 8.25 V, 1100 mA, operating conditions: +10 to
+35°C, manufacturer: Guangdong PISEN Electronics Co. Ltd.,
Made in China

Advertisement

Table of Contents
loading

Table of Contents