Download Print this page
Unitronics UniStream USP-070-B10 Installation Manual
Unitronics UniStream USP-070-B10 Installation Manual

Unitronics UniStream USP-070-B10 Installation Manual

Hmi panel

Advertisement

Quick Links

UniStream™ HMI Panel
Unitronics' UniStream™ platform comprises control devices that provide robust, flexible
solutions for industrial automation.
This guide provides basic installation information for the UniStream™ HMI Panel.
Technical specifications may be downloaded from the Unitronics website.
The UniStream™ platform
comprises CPU controllers, HMI
panels, and local I/O modules
that snap together to form an
all-in-one Programmable Logic
Controller (PLC).
Expand the I/O configuration
using a Local Expansion Kit or
remotely via CANbus.
CPU-for-Panel
HMI Panels
Available in
different
dimensions
I/O Options
Programming
Software
Use of this product is subject to a Unitronics Controller License Agreement, a copy of which can be found at
Unitronics
CPUs are Programmable Logic Controllers (PLCs), the heart of the
UniStream™ platform.
The CPU-for-Panel cannot operate independently. It must be plugged
into the back of a UniStream™ HMI panel. The panel provides the CPU's
power source. The CPU-for-Panel comprises:
 IO/COM Bus connector for interfacing Uni-I/O™ & Uni-COM™ modules
 Isolated RS485 and CANbus ports
 Backup battery
A high-resolution touch screen provides the operator interface for the
system and the physical foundation for a PLC+HMI+I/Os all-in-one
controller.
The DIN-rail structure on the panel's back is designed to physically
support a CPU-for-Panel controller, Uni-I/O™ and/or Uni-COM™
modules.
Each panel comprises:
 AUX connector to support the CPU
 1 audio-out 3.5mm jack
 1 microSD slot
 2 type A, USB host ports and 1 Mini-B USB device port
 2 Ethernet ports, RJ45, 10/100 Mbps
 1 power input connector, 12/24 VDC
Integrate I/Os into your system by using:
 On-board I/Os: snap onto the panel for an all-in-one configuration
 Local I/O via a Local Expansion Kit
 Remote I/O via EX-RC1
All-in-one UniLogic™ software, for hardware configuration,
communications, and HMI/PLC applications, available as a free
download from Unitronics web site.
Installation Guide
USP-070-B10, USP-070-B08
USP-104-B10, USP-104-M10
USP-156-B10
http://unitronics.com/unistream/Agreements/UniLic1.pdf
1

Advertisement

loading

Summary of Contents for Unitronics UniStream USP-070-B10

  • Page 1 All-in-one UniLogic™ software, for hardware configuration, Software communications, and HMI/PLC applications, available as a free download from Unitronics web site. Use of this product is subject to a Unitronics Controller License Agreement, a copy of which can be found at http://unitronics.com/unistream/Agreements/UniLic1.pdf Unitronics...
  • Page 2: Before You Begin

    Use caution.  All examples and diagrams are intended to aid understanding, and do not guarantee operation. Unitronics accepts no responsibility for actual use of this product based on these examples.  Please dispose of this product according to local and national standards and regulations.
  • Page 3: Kit Contents

    3.5mm Audio-out jack enables you to connect external amplifiers and speakers. Auxiliary Provides the electrical connection for the CPU-for-Panel. connector (AUX) Support Slots Snap the supports (supplied with 10.4” and 15.6” panels only) into these slots, to hold it upright on a desk while programming. Unitronics...
  • Page 4  The HMI Panel including the CPU and any modules that will be installed on it  Opening the doors of the CPU and modules For exact dimensions, please refer to the Mechanical Dimensions shown below. HMI Panel Mechanical Dimensions 7” Panel Unitronics...
  • Page 5 UniStream™ 10.4” Panel 15.6” Panel Unitronics...
  • Page 6 Hold the brackets securely against the unit while tightening the screws. When properly mounted, the panel is squarely situated in the panel cut-out as shown below. USP-070-B10: 4 mounting brackets USP-104-B10, USP-104-M10 : 8 mounting brackets USP-156-B10: 10 mounting brackets Unitronics...
  • Page 7 Use the shortest and thickest wires possible: less than 1m (3.3’) in length, minimum thickness 14 AWG (2 mm  Connect the power supply 0V to the earth of the system. For detailed information, refer to the document System Wiring Guidelines, located in the Technical Library in the Unitronics’ website. Unitronics...
  • Page 8: Installation Guide

    The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.

This manual is also suitable for:

Unistream usp-104-b10Unistream usp-070-b08Unistream usp-104-m10Unistream usp-156-b10