Advertisement
Kit Contents
1 HMI Panel: 7", 10.4" or 15.6"
7" panel, includes 4 mounting brackets
10.4" panel, includes 8 mounting
brackets and 2 panel supports
15.6" panel, includes 10 mounting
brackets and 2 panel supports
HMI Panel Diagram
1
Screen Protection
2
Audio Outlet Seal
Caution Keep the seal in place when the embedded speaker is not used. The seal must
be kept in place for IP66 and NEMA 4X compliance.
3
DIN-rail structure
4
12/24VDC power
input
5
2 Ethernet (RJ45)
ports
6
USB Device
7
2 USB Host ports
8
microSD slot
9
Audio-out jack
10
Auxiliary
connector (AUX)
11
Support Slots
Unitronics
HMI Panel Front and Rear View
A plastic sheet attached to the HMI Panel screen for protection.
Remove it during installation of the HMI Panel.
Prevents dust accumulation in the small outlet that serves the
HMI panel's embedded speaker.
Physical support for the CPU-for-Panel, Uni-I/O™ and/or Uni-
COM™ modules.
Connection point for the HMI Panel's power source.
Connect the Terminal Block supplied with the kit to the end of
the power cable.
Support high-speed Ethernet communications.
Use for application download and direct PC-UniStream
communication.
Provide the interface for external USB devices.
Supports standard microSD cards.
In addition to the HMI Panel's embedded speaker outlet, this
3.5mm Audio-out jack enables you to connect external
amplifiers and speakers.
Provides the electrical connection for the CPU-for-Panel.
Snap the supports (supplied with 10.4" and 15.6" panels only)
into these slots, to hold it upright on a desk while programming.
1 panel mounting seal
1 power terminal block
UniStream™
3
Advertisement
