Wireless Commands - D-Link DAP-2690 Reference Manual

Wireless Commands

get apmode
get band
get ssid
get ssidhidden
get autochannel
get channel
get ch_env
get availablechannel
get cwm
get wireless
get wlmode_db
get fixedrate
get beaconinterval
get dtim
get txpower
get wmm
get acktimeout
get shortgi
get igmpsnoop
get assoclimitstatus
get mcastrate
get wlancount
get wlan_utilization
set apmode
config wlan
set band
set ssid
set ssidhidden
set autoChannel
set channel
set cwm
set wireless
set wlmode_db
set beaconinterval
set dtim
set txpower
set wmm
set acktimeout_a
Display AP Operate Mode
Display current Band
Display Service Set ID
Display SSID hidden Mode as enabled or disabled
Display AutoChannel
Display Channel
Display channel environment
Display available channel list
Display CWM
Display Wireless
Display Wlmode
Display Fixed Rate
Display Beacon Interval
Display Delivery Traffic Indication Message Beacon Rate
Display Txpower
Display WMM
Display ACKTIMEOUT
Display Shortgi
Display IGMP Snoop
Display Association Limit setting status
Display mcast rate
Display wlan count
Get Wlan utilization
Set AP Operate Mode
Set AP Band (0:2.4G/1:5G)
Set ap band (2.4G or 5G)
Set Service Set ID
Set ssidhidden
Set AutoChannel
Set Channel (1--11)
Set CWM
Set Wireless
Set Wlmode
Set Beaconinterval (range:25--500)
Set DTIM (1--15)
Set Txpower
Set WMM
Set acktimeput in A band (range:25--200)