Thermo Scientific DeviceLink DLH-HP-100-TTL User Manual page 20

2
Chapter 2 DeviceLink
Connect the DeviceLink
20
Hub setup and operation
™
Hub to a network and link to Thermo Fisher Cloud
™
2. Open a web browser on your device (phone, tablet, or laptop), then enter the
following web address: https://dlh.thermofisher.com/
Note: You must enter https, not http.
The DLH Configuration window opens.
3. Select the network type (Wi-Fi or Ethernet). If you are going to connect the
DeviceLink Hub to the internet by Ethernet, skip the Wi-Fi configuration fields
™
in step 4. The SSID and Network Password fields are blocked out.
IMPORTANT! The DeviceLink
not both.
Hub should be configured for Wi-Fi or Ethernet,
™
DeviceLink Hub User Guide
™