Thermo Scientific DeviceLink DLH-HP-100-TTL User Manual page 17

2
Chapter 2 DeviceLink Hub setup and operation
™
Mount the DeviceLink Hub to the laboratory equipment or instrument using
™
magnets
1
1
Adhesive mounts (2 are shown)
1
3. Use the adhesive mounts and adjustable tie wraps to fasten power and data
cables.
An example of the attachment scheme is shown in the previous step.
Note: Before installing the adhesive mounts, ensure that the cables can reach the
appropriate plugs.
a. Find a location on the laboratory equipment or instrument to mount the
DeviceLink Hub.
™
17
DeviceLink Hub User Guide
™