Connect; Placement; Pair Up With The Subwoofer - Philips B8 SkyQuake Fidelio User Manual

3 Connect

This section helps you connect this
product to a TV and other devices.
For information about the basic
connections of this product and
accessories, see the quick start guide.
Note
•
For identification and supply ratings, see
the type plate at the back or bottom of the
product.
•
Before you make or change any
connections, make sure that all devices are
disconnected from the power outlet.

Placement

Place the subwoofer at least 1 meter
(3 feet) away from the main unit, and
10 centimeters (4 inches) away from the
wall.
For best results, place your subwoofer
as shown below.
10cm/4"
1m/3ft
EN
8
Pair up with the
subwoofer
The wireless subwoofer automatically
pairs up with the main unit for wireless
connection when you turn on the main
unit and the subwoofer.
If no audio from the wireless subwoofer
can be heard, manually pair up the
subwoofer.
1
Turn on the main unit and the
subwoofer.
» If the connection to the main
unit is lost, the indicator on the
subwoofer blinks white slowly.
2
Press the CONNECT (connect)
button on the subwoofer to enter
the pairing mode.
» The indicator on the subwoofer
blinks white quickly.
3
In HDMI ARC mode (press HDMI
ARC), on the remote control, within
six seconds, press
Volume + once, and then hold
down BASS +.
» If the pairing succeeds, the
indicator on the subwoofer lights
up white.
» If the pairing fails, the indicator
on the subwoofer blinks white
slowly.
4
If the pairing fails, repeat the steps
above.
Note
•
If the wireless dis-connection or pairing up
lasts 1 minute, the subwoofer automatically
switches to standby and the LED on the
subwoofer turns off.
twice then