Specifications - Panasonic SB-WA500PP Service Manual

4 Specifications

GENERAL
Power consumption:
Power consumption in off mode:
Power supply:
Dimensions (W x H x D):
Active subwoofer :
Mass:
Active subwoofer :
Operating temperature range:
Operating humidity range:
AMPLIFIER SECTION
RMS Output Power
Subwoofer ch:
Total RMS Dolby Digital mode power:
FTC Output Power
Subwoofer ch:
Total FTC Dolby Digital mode power:
SPEAKER SECTION
ACTIVE SUBWOOFER
Type:
Woofer:
Passive radiator:
Output sound pressure:
Frequency range:
Note:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
Active subwoofer : Approx. 0.2 W
250 mm x 323 mm x 356 mm (9 27/32" x 12 23/32" x 14 1/32")
20% to 80% RH (no condensation)
120 W per channel (8 Ω), 100 Hz, 10% THD
37 W per channel (8 Ω), 40 Hz to 120 Hz, 1% THD
1 way 1 speaker system (Kelton type)
8
Active subwoofer : 20 W
AC 120 V, 60 Hz
Approx. 6.7 kg (14.8 lbs)
0°C to +40°C (+32°F to +104°F)
240 W
87 W
16 cm (6 1/2") Cone type
25 cm (10")
78 dB/W(1m)
35 Hz to 180 Hz (-16dB)
40 Hz to 160 Hz (-10dB)