Advertisement
INCLUDED ACCESSORIES
1. Electrode cables
2. Self-adhesive electrode gel pads
3. Electrode belt
1
OPERATION
1. Place unit on a flat, stable surface.
2. Plug unit into an AC outlet.
3. Press the POWER button.
4. Use the FUNCTION button to cycle through the four different functions:
TIME, AUTO/MODE, BODY and SOLE. (For foot massage, be sure to select SOLE).
NOTE: When the device is powered on, the default setting is: TIME = 25 minutes,
AUTO/MODE = automatic, SOLE = 0 intensity and BODY = 0 intensity. The SOLE display
will be flashing. Press "+" or "-" to set the massage mode and intensity.
5. Press the INFRARED button to begin the soothing infrared heat (optional).
HOW TO USE THE FOOT MASSAGER FUNCTION
1. Place your clean, dry, bare feet on the foot pads.
2. Select SOLE and press "+" or "-" to increase or decrease the intensity to
the desired level.
3. Select MODE and press "+" or "-" to select the desired MODE setting.
HOW TO USE THE T.E.N.S. MASSAGER FUNCTION
1. Connect the electrode cables to the self-adhesive gel pads or the electrode belt.
2. Apply the self-adhesive gel pads to clean skin, or wrap the electrode belt
around your waist.
3. Plug the electrode cables into the electrode jack.
4. Select BODY and press "+" or "-" to increase or decrease the intensity to
the desired level.
5. Select MODE and press "+" or "-" to select the desired MODE setting.
2
4. AC power adapter
5. Wireless remote control
3
4
- 3 -
5
Advertisement
