Maintenance - Ryobi RT100 Operator's Manual

WARNING:
When servicing, use only identical Ryobi replacement
parts. Use of any other parts may create a hazard or cause
product damage.
WARNING:
Always begin any maintenance procedure by disconnect-
ing the router and router table from the power supply to
avoid risk of serious personal injury
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. come in contact with
plastic parts. They contain chemicals that can damage,
weaken, or destroy plastic.

MAINTENANCE

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
Periodically check all clamps, nuts, bolts and screws for
tightness and condition. Make sure that the throat plate,
guard/dust cover assembly and lower guards are prop-
erly positioned and securely attached.
IMPORTANT
Servicing of a tool with double insulation requires extreme
care and knowledge of the system and should be performed
only by a qualified service technician. For service we suggest
you return the tool to your nearest RYOBI AUTHORIZED
SERVICE CENTER for repair. When servicing use only
identical Ryobi replacement parts.
To reduce the risk of electric shock, this equipment has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do
not change the plug in any way.
Page 12