Ryobi RY52014 Operator's Manual page 10

FILLING TANK
 Clean surface around fuel cap to prevent contamina-
tion.
 Loosen fuel cap slowly. Rest the cap on a clean
surface.
 Carefully pour fuel into the tank. Avoid spillage.
 Prior to replacing the fuel cap, clean and inspect the
gasket.
 Immediately replace fuel cap and hand tighten. Wipe up
any fuel spillage.
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with
side shields, a hard hat, and safety shoes when
operating tools. Failure to do so could result in
objects being thrown into your eyes, resulting in
possible serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of
attachments or accessories not recommended can result
in serious personal injury.
ASSEMBLY
FIRST CUT
1/4 DIAMETER
10
SECOND CUT
LOAD
FINAL CUT
Fig. 5