Features - Ryobi RY52004 Operator's Manual

PRODUCT SPECIFICATIONS
Engine Displacement ...................................................................................................................................................... 30cc
Bar length ....................................................................................................................................................................... 10 in.
Weight ............................................................................................................................................................................16 lb.
CHAIN OILER
TANK CAP
KNOW YOUR PRUNER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ENGINE SWITCH
The engine switch controls the ignition system. The switch
must be in the ON (I) position for the engine to start and
run.
"J" BARRIER HANDLE
Using the J" Barrier handle allows better control of the pruner
to maximize operator safety.
PRIMER BULB
The priming bulb pumps fuel from the fuel tank to the car-
buretor. This is necessary only when starting a cold engine
or after refueling an engine that has run out of fuel.
"J" BARRIER
PRUNER
ATTACHMENT
BAR
CHAIN

FEATURES

HANDLE
COUPLER
KNOB
SHOULDER STRAP
The shoulder strap helps support the weight of the pruner
during use.
START LEVER
The start lever opens and closes the choke valve in the
carburetor.
STARTER GRIP
The starter grip is used for starting the engine.
THROTTLE TRIGGER
The throttle trigger is used for starting the pruner, and also
for controlling blade rotation.
7
STARTER GRIP
ENGINE
SWITCH
THROTTLE
TRIGGER
SHOULDER
STRAP
SCABBARD
PRIMER BULB
Fig. 1