Sleeping power-save mode
On normal status, when the unit stoped over 10minutes, it will change to sleeping mode, on this mode, the
power consumption is 4mah/h only. When it get any command or been moved, it will start GPS locating
automatically.
Forced sleeping mode, Setting: Send SMS "sleep+password", the unit will reply "sleep ok", it enter to
forced sleeping power-save mode.
Start device, send SMS "nosleep+password",the unit will reply "nosleep ok", it start GPRS and GPS
locating.
Restore factory settings
Note: It is e
uthorized number
ffective sending by a
Send SMS command "format", the unit will reply "
The tracher will immediateiy restore the factory setting. All
"
previous settings will be canceled.
OR
Send "begin+password" in SMS to the unit, it will replay "begin ok" and initialize all the setting. (Default
Password:123456)
For example, send SMS "begin123456" to the tracker via a cell phone, If succeeded, it will replay "begin
ok"
GMGPS
Tracker
GM SAFETY TRAINING SDN BHD (1173191-T)
9