Product Specifications; Features; Side Handle; Spindle Lock - Ryobi AG402 Operator's Manual

PRODUCT SPECIFICATIONS

Wheel Size ............................................................. 4 1/2 in.
Cord Length ...............................................................10 ft.
Arbor Size ................................................ 5/8 in. x 11 UNC
SPINDLE
LOCK
KNOW YOUR ANGLE GRINDER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.

FEATURES

No Load Speed .................................. 11,000 r/min. (RPM)
Input ............................... 120 V, 60 Hz, AC only, 4.4 Amps
Net Weight .............................................................. 4.1 lbs.
GUARD

SIDE HANDLE

The side handle can be installed on the left or right side of
the grinder, depending on operator preference, for stabili-
zation and must be used during all operations. In addition
to maintaining safe control during use, the side handle also
provides convenient ease of operation for the operator.

SPINDLE LOCK

The spindle lock keeps the spindle from turning while install-
ing and removing wheels and disks.

WRENCH STORAGE

The wrench can be easily stored in the side handle when
not in use.
8
SIDE HANDLE
WRENCH
STORAGE
WRENCH
Fig. 1