Features; Product Specifications - Ryobi P220 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS

Chuck ............................................................................................................................................................................1/2 in.
Motor ......................................................................................................................................................................18 Volt DC
Switch..............................................................................................................................................................Variable Speed
Gear Box ................................................................................................................................................................... 3-Speed
No Load Speed .......................................................................... Lo (0 - 370/min.), Hi (0-750/min.), Super-Hi (0 - 2200/min.)
Hammer Speed ......................................................... Lo (0 - 5,920 BPM*), Hi (0-12,000 BPM*), Super Hi (0 - 35,200 BPM*)
Charger Input ....................................................................................................................................... 120 V, 60 Hz, AC only
Charge Rate ................................................................................................................................................................. 1 Hour
Torque...................................................................................................................................................... Maximum 480 in.lb.
* Blows Per Minute
THREE SPEED
GEAR TRAIN (SUPER HIGH-HIGH-LOW)
DEPTH
GAUGE ROD
AUXILIARY
HANDLE
DIRECTION OF
ROTATION SELECTOR
(FORWARD/CENTER LOCK/REVERSE)
KEYLESS CHUCK
MODE SELECTOR TORQUE
TRIGGER
ADJUSTMENT RING
SWITCH
BIT
STORAGE
AREA Fig. 1
8