Advertisement
Assembly / Operating Instructions
Assembling Chairs
1.
Line up the holes in the rear of
the seat with the holes on the
underside of the back seat panel,
as shown in image. Insert 1 x screw
into each hole.
Tighten with supplied allen key.
PLEASE NOTE: Do not over tighten the bolts.
2.
Taking one leg at a time, line up leg with hole and turn clockwise.
Keep turning until leg is firmly into position. Repeat with
remaining 3 legs.
Follow previous steps for the second chair.
PLEASE NOTE: Do not over tighten the legs.
3.
Once all legs are assembled, carefully
turn the chair upright as shown in
image.
Your table and chair set is now complete.
6
Assembly / Operating Instructions
How to care for your Table and Chairs
Cleaning
To ensure the long-lasting use of your Table and Chairs, wipe down with a damp cloth and
use a mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a
clean dry place.
Maintenance
Always check parts regularly for tightness of bolts, nuts and other fasteners – tighten or
replace if required. To maintain the safety of your Table and Chairs, seek prompt repairs for
bent, torn, worn or broken parts. Use only those parts and accessories approved by CNP
Brands.
If you have any difficulties in assembling the toy box, please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse
Distribution on 0800 567 5000.
7
Advertisement
