Advertisement
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Table lid
Table top
Seat back panel
Seat back
panel
Seat panel
4
Chair leg
x1
Table leg
x1
x1
Allen key
Bolt (48mm)
x1
x2
Assembly / Operating Instructions
Assembling Table
1.
Place a table leg into position as shown in the image. Line up the
screw that is attached to the leg and insert gently into the
pre-drilled hole underneath the table.
Turn the leg clockwise until leg is firmly into position.
2. Repeat the above step with the remaining 3 legs.
Turn the table upright.
PLEASE NOTE: Do not over tighten the legs.
x8
3. Insert lid into the middle of the table as per image.
x4
x1
x4
5
Advertisement
