Related Manuals for AC Pro GMV-36WL/A-T(U)
Summary of Contents for AC Pro GMV-36WL/A-T(U)
-
Page 1: User Manual
AC Pro VRF Mini DC Inverter User Manual Models GMV-36WL/A-T(U) GMV-48WL/A-T(U) GMV-60WL/A-T(U) - Page 2 We reserve the right to correct any clerical errors. Copyright 2018 AC pro.
- Page 3 Drainage pump 10) IDU EXV 10) IDU EXV 11) Static pressure level 11) Static pressure level WIRED CONTROLLER 2 Wired Controller 2 Wired Controller 2.1 Control panel Control Panel 2.1 Control panel...
- Page 4 Symbols Instructions Up and down swing function Left and right swing function Its valid under save mode and dispays during setting process. Temperature Lower limit for cooling: Limit the minimum temperature value under cooling or dry mode. Tem- perature upper limit for heating: Limit the maximum temperature value under heating, space heating or 3D heating mode.
- Page 5 Symbols Instructions Light On/Off Function X-Function Health Function Fresh Air Status Out Function Outdoor Unit Defrosting Status Gate-Control Function Shielding Status Child Lock Status One Wired Controller Controls Multiple Indoor Units Save Status of indoor unit it indicates the current wired controller is the slave wired controller (address of wired controller is 02) Memory status (The indoor unit reumes the original setting state after power failure and then power recovery)
-
Page 6: Installation And Removal
Installation and Removal 13/64 29/32 13/64 4-13/32 29/32 1-43/64 Unit: Inch 29/32 4-13/32 29/32 1-43/64 Unit: Inch Installation Method Above is a simple installation method of wired controller. Please pay attention to the following: 1) Before installation, disconnect power of the indoor unit. Do not operate when power is connected. 2) Pull out the 2-core twisted pair cable from the installation hole on the wall and lead it through the hole on the back plate of wired controller. -
Page 7: Removal Method
Stick the cable in the slot that is left of the terminals and buckle the wired controller’s panel with its back plate. WARNING If caliber of the communication cord is too large, which causes difficulty in leading or sticking the cord If caliber of the communication cord is too large, which causes difficulty in leading or sticking the cord accord- according to above point 2 and point 5, strip some of the sheath of the communication cable to meet the ing to above point 2 and point 5, strip some of the sheath of the communication cable to meet the installation... - Page 8 Button name and function introduction Button Name Function Button name and function introduction ON/OFF Turn on or turn off the unit Button name Function Button name and function introduction TURBO Set turbo function ON/OFF Turn on or turn off the unit Button name Function ON/OFF...
- Page 9 Set temperature and time Set temperature and time Set temperature and time Set temperature and time Set temperature and time Set left&right swing status Remote controller YV1L1 Remote controller YV1L1 Remote controller YV1L1 Remote controller YV1L1 Set fan speed Remote controller YV1L1 Set temperature and time Remote controller YV1L1 Remote controller YV1L1...
Need help?
Do you have a question about the GMV-36WL/A-T(U) and is the answer not in the manual?
Questions and answers