Ctouch 2meet Quick Start Manual

BASIC OPERATION

2MEET OPERATION

Leddura 2Meet | Quick start guide CTOUCH Europe b.v. - imPD

REMOTE CONTROL

Switch the CTOUCH interactive display
Display or exit input source menu
power on or off
To confirm or enter a sub-menu or toggle
Use Arrow buttons to navigate in on-screen
between options during menu operation.
menu.
Return to previous menu or exit the on-
screen menu
Display desktop (Home page) on the screen
Display or exit the setting menu screen
Turn off the backlight, the screen will go black
but the processes will continue (like playing
Mute the sound
music). Press any button on the remote controle
Select aspect ratio again or touch the CTOUCH internative display
glass plate with two fingers in order to turn on
the backlight again.
Volume down
Volume up
Freeze the current picture
These USB tokens are for visitors or adhoc users, so no installation of
the MirrorOp software is required.
To connect wireless to the screen, insert USB stick in your device.
Click on the file to run the sharing software;
For PC click on: "Download&Show_v1071"
For MAC use Airplay or click on: "MirrorOp1.0.46.dmg"
*Nothing will be installed it is only an executable which run the sharing software.
*We suggest to place these tokens near the Leddura 2Meet (on the table in front).
For more information and manual check: www.leddura2meet.eu

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
The power to engage
QUICKSTART
GUIDE