Page 1
P O W E R daisy Wrap paper template around roller tube, the end you want to install the Daisy Power motor and controls Without the drive motor inside the tube, mark and drill the 6 x 4.5mm holes through the template with the 4.5mm...
Page 2
Insert and tighten the 6 x mounting screws Ensure drive motor wire is running through the recess in the housing on the end Install the end frame, secure firmly 4 x Install the control housing, secure firmly the mounting bolts 4 x mounting bolts Plug in the drive motor wire to the connector socket on the underside of the control housing Note: each connector socket has labels for the correct appliance...
Page 3
(Note: There is a keep alive function that will keep unit operational even in the shade without the indicator light illuminating) daisy Page 3 pool covers & rollers...
Page 4
Lift Pin (pull up) button on the remote as you are pulling the cover back onto the pool from one side Contact Details sales@daisypoolcovers.com.au daisy Phone 1300 551 811 Page 4 | www.daisypoolcovers.com.au pool covers & rollers...
This manual is also suitable for:
Dpst1250Dpsq52Dpwm1255Dpsq58Dpst64Dpwm52...
Show all