BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you should clean your
kettle before use by boiling a full kettle of water twice and then discarding the water.
Wipe the surface with a damp cloth.
NOTE: the max capacity of kettle is 1.2L.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove it from the power base and open lid by button on handle,
fill with the desired amount of water, and then close the lid. Alternatively, the kettle may
be filled through the spout. The water level should not exceed max marks or sit below
min level. Too little water will result in the kettle switching off before the water has
boiled. NOTE: Do not fill the water over the maximum level, as water may spill out of
the spout when boiling. Ensure that the lid is firmly in place before plugging the power
outlet.
2. Position the kettle on the power base.
3. Connect the plug into a power outlet. Press down the switch, the indicator will light up.
The kettle will switch off automatically once the water has boiled.
Page 3 of 5