Download Print this page

Nero 740063 Instruction Manual

Studio 1.2 litre kettle, brushed stainless steel with black handle and trim

Advertisement

Quick Links

Nero Studio 1.2 Litre Kettle
Brushed Stainless Steel with Black Handle and Trim
Product Number 740063
INSTRUCTION MANUAL
Read this booklet thoroughly before using and save it for future reference.
IMPORTANT SAFEGUARDS: Read all instructions before using.
Before connecting the kettle to the power supply, check that the voltage indicated
on the appliance (underside of the kettle and base) corresponds with the voltage in
your premises. If this is not the case, contact your dealer and do not use the kettle.
Images in this manual are for illustrative purposes only.
Due to constant improvements we advise that changes to the design,
material, specifications and product configuration may
occur at any time without notice.

Advertisement

loading

Summary of Contents for Nero 740063

  • Page 1 Nero Studio 1.2 Litre Kettle Brushed Stainless Steel with Black Handle and Trim Product Number 740063 INSTRUCTION MANUAL Read this booklet thoroughly before using and save it for future reference. IMPORTANT SAFEGUARDS: Read all instructions before using. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside of the kettle and base) corresponds with the voltage in your premises.
  • Page 2 ·Do not let the cord hang over the edge of a table or counter or touch a hot surface. ·Do not place on or near a hot gas or electric burner or in a heated oven. ·Do not operate the appliance without anything in it to avoid damaging the heat elements.
  • Page 3: Before Using Your Kettle

    BEFORE USING YOUR KETTLE If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling a full kettle of water twice and then discarding the water. Wipe the surface with a damp cloth. NOTE: the max capacity of kettle is 1.2L.
  • Page 4: Boil-Dry Protect

    NOTE: Ensure that switch is free of obstructions and the lid is firmly closed, the kettle will not turn off if the switch is constrained or if the lid is open. 4. Lift the kettle from the power base and then pour the water. NOTE: operate carefully when pouring the water from your kettle,as boiling water will scald.
  • Page 5: Removal Of Mineral Deposits

    You can use a descaler - such as our own Nero Descaler Tablets - and follow the instructions on the package. Alternatively, you may follow below instructions using white vinegar.