Cable-Clamp - Hafele 539.07.531 Installation - Use - Maintenance

Fig. 5
Adaptation to various types of gas
(Fig. 6-7) Should the appliance be pre-set for a different type of gas than that available,
proceed as follows:
• replace the injectors (Fig. 5) with the corresponding type of gas to be used (see table
"Uses characteristics").
• to adjust to the minimum, use a screwdriver on the screw placed on the tap (Fig. 6)
after turning the tap to its minimum position. For ULPG (butane/propane) screw
tight.
Fig. 6
10

CABLE-CLAMP

Fig. 7