1. Manuals
  2. Brands
  3. B&G Manuals
  4. Amplifier
  5. Prototype PT12060
  6. Owner's manual

B&G Prototype PT12060 Owner's Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

owner's manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prototype PT12060 and is the answer not in the manual?

Questions and answers

Related Manuals for B&G Prototype PT12060

Summary of Contents for B&G Prototype PT12060

  • Page 1 owner's manual...
  • Page 2 The B&G Prototype™ Amp is our take on the classic tube amps of the 1950s & ' 6 0s. Inspired by the sound and design concepts of this era, our hearts and minds were set to combine the best features of those classics with our own ideas and innovation. Our main goal was to provide a great amount of clean headroom, and to push the breaking point higher, without compromising the power and growl of the tube overdrive and fuzz.

  • Page 3: Specifications

    specifications Type: PT 1 Part numbers: PT12060(120V~,60Hz)US PT23050(230V~,50Hz)EUR PT1005060(100V~,50/60Hz)JPN Power requirement: 100W Input impedance: 1MΩ Power amp output: 16W into 4Ω@<10%THD, 1kHz Speakers: Two 8ohm, 10", Jensen Special Deisgn P-10R, (ZJ05050) Dimensions: Height: 18.89 in (48 cm) • Width: 21.65 in (55 cm) • Depth: 9.84 in (25 cm) Weight: 42.5 lb (19.3 kg) Operation temperatures: 45°...

  • Page 4: Rear Panel

    rear panel PLUG-IN CONNECTION FOR THE 4Ω INTERNAL SPEAKERS - A speaker must always be connected to this jack when the amplifier is ON. To avoid distortion or damage to the amplifier, use a 4Ω speaker impedance load. POWER CORD SOCKET - Connect to a grounded A/C outlet using the supplied power cord, in accordance with the voltage and frequency ratings specified on the rear panel of your amplifier.

  • Page 5: Important Safety Instructions

    important safety instructions Read and follow all instructions, heed all warnings. • Connect the power supply cord only to an earth grounded AC receptacle. The grounding of this product must be maintained. Use only the power supply cord provided with this product. •...
  • Page 6 warranty B&G GUITARS warrants that the B&G Prototype™ amplifier you have purchased shall be free of any defects in parts and workmanship if used under normal operating conditions for a period of three (3) years from the date of purchase or initial lease, including speakers, cabinets, handles and cabinet hardware.

This manual is also suitable for:

Prototype pt1005060Prototype pt23050

Table of Contents