Advertisement
Advertisement
Table of Contents
Related Manuals for B&G PT12060
Summary of Contents for B&G PT12060
- Page 1 owner's manual...
- Page 2 The B&G Prototype™ Amp is our take on the classic tube amps of the 1950s & ' 6 0s. Inspired by the sound and design concepts of this era, our hearts and minds were set to combine the best features of those classics with our own ideas and innovation. Our main goal was to provide a great amount of clean headroom and to push the breaking point higher, without compromising the power and growl of the tube overdrive and fuzz.
-
Page 3: Specifications
Type: PT 1 Part Numbers: PT12060(120V~, 60Hz)US PT23050(230V~,50Hz)EUR PT1005060(100V~,50/60Hz) JPN Power Requirement: Input Impedance: 1MΩ Power Amp Output: 16W into 4Ω@<10%THD, 1kHz Speakers: Two 8ohm, 10", Jensen Special Deisgn P-10R, (ZJ05050) Height: 18.89 in (48 cm) • Width: 21.65 in (55 cm) • Depth: 9.84 in (25 cm) -
Page 4: Rear Panel
rear panel Plug-in connection for the 4Ω internal speakers. A speaker must always be connected to this jack when the amplifier is ON. A speaker/s impedance load of 4Ω should be used to avoid distortion or damage to the amplifier. POWER CORD SOCKET - Connect to a grounded A/C outlet using the supplied power cord, in accordance with the voltage and frequency ratings specified on the rear panel of your amplifier. - Page 5 This symbol warns the user of dangerous voltage levels localized within the enclosure. This symbol advises the user to read all accompanying literature for safe operation of the unit. Read and follow all instructions, heed all warnings. • Connect the power supply cord only to an earth grounded ac receptacle according to the voltage and frequency ratings.
Need help?
Do you have a question about the PT12060 and is the answer not in the manual?
Questions and answers