Use And Operation; Function Buttons - Honeywell CS04XE User Manual

USE & OPERATION
CONTROL PANEL

FUNCTION BUTTONS

POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed.
After a few seconds the speed will switch to low. To turn the unit off, press the button again.
SPEED
Press the SPEED button repeatedly to change the speed between H - M - L.
The indicator light will show the selected speed:
MODE
Press the MODE button until the COOL indicator light is illuminated on the control panel. This
activates evaporative cooling. The water pump will operate and you will feel the cooler air after the
Honeycomb Cooling Media is completely wet. When the COOL indicator light is switched OFF, the
unit can still function in a fan only mode (without evaporative cooling).
SWING
Press the SWING button until the SWING indicator light is illuminated on
the control panel. The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical
air flow.
H
M
L
COOL
High (H) Medium (M)
EN
POWER
SPEED
MODE
SWING
Low (L)
2
LOUVER
MOVEMENT