1. The REMOTE control input requires a voltage between 10VDC and 60VDC referenced to the input ground to enable the output of the converter.
Converters ship with a jumper connecting the REMOTE input and the input positive terminal, which must be removed before the control feature will function.
2. The REMOTE control will disable the converter when the remote terminals connected to the INPUT NEG terminal of the converter. The converter is enabled
Page 2
The Purchaser shall at their own risk and cost return the defective Do not apply power until the unit is completely product to ICT s factory or designated repair center once an RMA is blown, replace it only with a fuse of the same rating.
This manual is also suitable for:
Ict1212-35ai2Ict1224-10ai2Ict1224-20ai2Ict103048-5ai2Ict206012-12ai2Ict206012-20ai2...
Show all