Chapter 3: Configuration; System Requirements; Operating System; Ps/2 Keyboard And Msr Driver Setup - NCR 6932-2202-9090 User Manual

Configuration
Chapter 3:

System Requirements

Before configuring the NCR 6932–2xxx 64-Key Keyboard, ensure that it is connected to
the POS terminal and ensure that the requirements listed below are met.

Operating System

NCR NCR 6932-2xxx 64-Key Keyboard requires either one of the following operating
systems:
• Linux
• POSReady 2009
• Windows 7
• Windows 10
Note: Contact the local NCR 6932-2xxx 64-Key Keyboard supplier for a copy of the
configuration software.

PS/2 Keyboard and MSR Driver Setup

When using the PS/2 Keyboard or Magnetic Stripe Reader (MSR) in Windows XP®
(POSReady 2009), Windows 7 (POSReady 7), and Windows 10 environments, make sure
to run the driver for the keyboard.
• PS/2 driver supports for 32–bit OS (Windows XP®, Windows 7 and Windows 10).
• For USB keyboards or MSR card readers, as no driver is needed, it is permitted to
Note: For more information, refer to Manual Setup of the Keyboard Driver in this
chapter.

Linux Environment

For Linux users, utilization of the Windows GUI is required to create the key map file.
Therefore, it is NOT permitted to program PS/2 keyboards or MSR card readers that
are 64–bit OS.
program USB devices under 32 bit or 64 bit OS.