Advertisement
If the outboard motor was
submerged
STEP 5 – Attempt to start the engine
NOTICE
If the outboard motor was running when it
became submerged, there may be mechanical
damage, such as bent connecting rods. If the
engine binds when cranked, do not attempt to
run the outboard motor until it has been
repaired.
19. Attempt to start the engine.
-
If the engine fails to start, remove the spark
plugs, clean and dry the electrodes, then
reinstall the spark plugs and attempt to
start the engine again.
-
If used engine oil showed signs of water
contamination, then a second engine oil
change should be performed after running
the engine for 1/2 hour.
-
If the engine starts and no mechanical
damage is evident, continue to run the
engine for 1/2 hour or longer.
Take the outboard motor to your dealer as soon
as possible.
18. Install the engine
cover.
7/7
Advertisement
